Completed ductless project · North Bergen, New Jersey

7-Zone DuraStar Mini Split Installation in North Bergen, NJ

City Ventilations installed a seven-zone DuraStar ductless mini-split system in North Bergen. Seven wall-mounted indoor units connect to two 28,000 BTU outdoor units, giving each covered area its own temperature control.

Wall-mounted DuraStar mini split indoor unit installed in a North Bergen room
Installed systemNorth Bergen, NJ

Seven wall-mounted indoor units connected across two outdoor systems

LocationNorth Bergen, NJ
Configuration7 ductless zones
Indoor equipment7 wall-mounted units
Outdoor equipment2 × 28,000 BTU units

Project overview

A multi-zone ductless system built around separate rooms

This North Bergen installation goes well beyond a one-room mini split. City Ventilations placed seven wall-mounted units around the property and connected them to two DuraStar outdoor units, each rated at 28,000 BTU.

Each indoor unit serves its own area, so occupants do not have to rely on one central thermostat for the entire property. The photos show two of the wall units, both outdoor units, and sections of the insulated line-set routing.

DuraStar configurationSeven zones

Each zone has its own wall-mounted indoor unit.

Indoor equipmentSeven wall units

Separate indoor delivery points across multiple rooms or areas.

Outdoor equipmentTwo units

The project used two DuraStar outdoor systems rather than a single condenser.

Outdoor capacity28,000 BTU each

Each of the two outdoor units has a 28,000 BTU capacity.

Installation details

What the seven-zone installation involved

A project with seven indoor units depends on more than the equipment count. Every zone needs a workable location and a route back to the outdoor system serving it.

01

Seven indoor comfort zones

Each wall-mounted unit serves its own assigned area and provides local control at that indoor unit.

02

Two outdoor systems

The seven indoor units were distributed across two 28,000 BTU DuraStar outdoor units.

03

Refrigerant and communication routes

The outdoor photographs show grouped insulated lines and wiring routed between the indoor and outdoor equipment.

04

Ductless delivery

Conditioned air is supplied directly from the wall-mounted units, without extending a central duct branch to each room.

System context

Why a seven-zone layout needs careful coordination

With seven indoor units, the visible wall equipment is only part of the project. Each zone also needs refrigerant piping, control wiring, condensate management, and an assignment to the outdoor unit that supports it.

Indoor placement affects air movement and service access. Outdoor placement affects clearances, routing distance, drainage, and access to the connections. The two sides have to be planned together before the finished system can provide practical room-by-room control.

Individual indoor control

Each wall unit lets the user adjust the temperature for that area.

Capacity shared across zones

The indoor units operate through two 28,000 BTU outdoor systems.

No new central duct branches

The wall-mounted units deliver heating and cooling directly in their rooms.

Considering a similar project?

What to consider for a multi-zone mini split

Start with a room-by-room plan, then choose the equipment. A seven-zone layout works only when unit placement, capacity, drainage, and line routing make sense for the building.

01

Room-by-room requirements

Room size, exposure, insulation, occupancy, and the intended heating or cooling role affect each zone.

02

Indoor-unit placement

The wall unit needs room to move air, easy access for controls and service, and a practical route for the lines and condensate.

03

Outdoor-unit design

Indoor units must be grouped within manufacturer capacity and connection limits for the outdoor systems.

04

Routing and finish work

Line-set paths, wall penetrations, protective covers, drainage, electrical work, and access should be defined before installation.

Licensed New Jersey contractor

Meet the company behind the installation

City Ventilations is based in Monroe Township and serves customers across New Jersey. License and registration numbers are included below for easy reference.

NJ Master HVACR#19HC00316600
NJ Home Improvement Contractor#13VH07998400
EPARefrigerant certified
Contact(732) 790-2534

Discuss your property

Need an HVAC installation estimate?

Tell City Ventilations what equipment you have now, which rooms are uncomfortable, and what you would like to change. The team can review the property and prepare an estimate around its layout, existing system, and comfort needs.